1- heavy cast aluminum top cover with integral led heat dissipating pad. 2- 30 dia. x .090 (2.3) thick hard aluminum top shade. underside surface is painted white enamel to optimize light performance (EC811 only). 3- high impact white translucent uv stabilized acrylic diffuser. 4- set of 4 x 1/2 (13) solid aluminum struts. 5- cast aluminum upper electrical housing. 6- cast aluminum lower electrical housing. materials eclipse is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. light source is enclosed in a high impact white translucent uv stabilized acrylic sealed diffuser. the lower cast aluminum housing fits with a 4 or 5 (102 or 127) pole and contains all electrical controls on a removable tray. electrical led driver standard driver is 0-10v dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60hz), optional 347v on request, minimum operating temperature of -30oc/-22of, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110oc) . led standard 4000k/80cri. optional 2700k, 3000k and 3500k. removable modular led platform. life 75,000hrs l 86 b 50 (based on iesna tm-21 test method and lm-80 data). 145,000hrs l 70 b 50 (calculated projection from lm-80 data). finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight: 25.5lbs (11.5kg) eclipse is designed for ease of access and installation. standard luminaire mounts on a 4 (102) or 5 (127) pole. alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. photometric testing performed by an independent laboratory in accordance with ies lm-79-08 standards at 25oc. lumen depreciation in accordance with iesna lm80 standards. ce certification on request. rated ip65. 1 29.4 (747) 30 (762) EC811 epa: 1.25 12.5 (317) ec810 epa: 0.96 ec810/EC811 series eclipse maxi - led 8 pole/wall mount ec810 EC811 nov 2017 rev 0 29.4 (747) 3 2 4 1 6 5 luminis.com type: quantity: project: catalog number: fixture wattage voltage finish option option option option luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
2 ec810/EC811 series eclipse maxi - led nov 2017 rev 0 typical photometry summary standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color (refer to color chart) 120v 277v optional 347v model# led light selection voltage 1 finish suffix l1w18r1 l1w30r1 l1w48r1 l1w65r1 input watts 22w 38w 51w 60w delivered lumens 1805 3035 3891 4553 cri 80 cct ok 4000k ec600 - sh ec810 luminaire selection notes 1- luminaires are factory prewired for 120v (if no voltage is specified). for other voltages, please specify with catalog number or consult factory. 2- fuse and photocell options are normally installed with poles when specified with luminis luminaires (except for other types of mounting). 3- 3 tenon pole adaptor only required for 3 o.d. poles by others. mounting electrical ac8 pole mount attachment with 45o support 2ac8 double pole mount attachment with 45o support at 180o aw8 wall mount attachment with 45o support ec8p pole mount attachment with stacked arms 2ec8p double pole mount attachment with stacked arms at 180o ec8ps pole mount attachment with short stacked arms (ec810 only) 2ec8ps double pole mount attachment with short stacked arms at 180o (ec810 only) ec8w wall mount attachment with stacked arms ec8ws wall mount attachment with short stacked arms (ec810 only) tn3 3 tenon pole adaptor 3 pr8 pedestal mount adaptor fs fuse 2 ph photocell 2 347l 347v input power driver options EC811 please visit our web site www.luminis.com for complete i.e.s. formatted download data. descriptive information ec810-l1w65r1 EC811-l1w65r1 total lms: 4553 lumens total input watts: 60.1 w source: led efficacy: 75.7 lumens/watt bug: b2-u4-g3 cct/cri: 4000k/80 maximum candela: 584 @ 65 ov accessories hs8 house side shield light alternate cct ok led (lcf: lumen conversion factor) k27 2700k cct 80 cri (lcf: 0.91) k3 3000k cct 80 cri (lcf: 0.94) k35 3500k cct 80 cri (lcf: 0.98) note: other cct & higher cri available, please consult factory. luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
3 ec810/EC811 series eclipse maxi - led power feed 28 (711) 42.2 (1072) 30 (762) 17.75 (451) 18 (457) power feed 12 (304) power feed 12 (304) 12 (304) 34.5 (876) paa pole series psb pole series pst pole series nov 2017 rev 0 pole mount ac8 1 x 3 (25x76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) ec8p (ec810 and EC811) set of (2) 1 x 3 (25x76) extruded aluminum side pole straight mounting. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.97) ec8ps (ec810 only) set of (2) 1 x 3 (25x76) extruded aluminum side pole straight mounting. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.72) pr8 8 dia.(203) x 8 3/4 (222)h. extruded aluminum stand designed for short walls or pier mount. ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 pst10 ------- psb10 10 ft. (3 m) paa412 paa512 pst12 ------- psb12 12 ft. (3,6 m) paa414 paa514 pst14 ------- psb14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb16 16 ft. (4,8 m) paa418 paa518 ------- pta18 psb18 18 ft. (5,5 m) paa420 paa520 ------- pta20 psb20 20 ft. (6,0 m) ------- ------- ------- pta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matching pole selection 42.2 (1072) 42.2 (1072) 8 dia. (203) base 6 (152) dia. bolt circle 4 (102) dia. power feed opening note : pst pole with ac8 or 2ac8 attachment requires a 30 (762) tenon extension over pole nominal height. ec8p, 2ec8p, ec8ps and 2ec8ps require an 18 tenon extension. factory installed. 2ac8 double pole mount attachments with 45o support at 180o 2ec8ps double pole mount attachment with short arms at 180o (ec810 only) 2ec8p double pole mount attachment with arms at 180o pta pole series luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
4 ec810/EC811 series eclipse maxi - led 18 (457) power feed 11 (279) power feed 28 (711) power feed 42.2 (1072) 17.75 (451) nov 2017 rev 0 ec8ws (ec810 only) set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. 4.625 (118) 3 (76) 17.75 (451) power feed 3 (76) 4.625 (118) power feed 6.125 (156) 3 (76) 4.625 (118) power feed 6.125 (156) wall mount aw8 1 x 3 (25x76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. ec8w (ec810 and EC811) set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. mounting mounting mounting 42.2 (1072) 42.2 (1072) luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
|
